Customized 12v DC Dry Contact Microwave Motion Sensor For Solar Energy Garden Lamp MC016D manufacturer from China China LED Driver Marketplace

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: MC016D

12v DC Input Dry Contact Microwave Motion Sensor MC016D Special For Solar Energy Garden Lamp Or Industrial Appl

12v DC Input Dry Contact Microwave Motion Sensor MC016D Special For Solar Energy Garden Lamp Or Industrial Application

Description

MC016D is a Dry contact detector .
Automatic switching based on motion and light level.
Low voltage input 12VDC.
Detection area, time delay and daylight threshold can be precisely set via DIP switch.
MCO16D is an innovative and active motion detector with system5.8GHz. Motion can be detected through plastic, glass and thin non-metal materials.
The sensor basically has the same function as MC011S. But it supplies dry contacts in normally closed mode and normally open mode. Dry contact means open or close contact without any current or voltage. It is prefect for use in the solar energy garden lamp or industrial control application where requires isolation between motion signal and power supply.
Users can select the right mode according to different application.

Function:

ON-off function

Specifications:

Operating voltage	12Vdc(can be customized)
HF system	5.8GHz±75MHz, ISM wave band
Power consumption	≤0.5W(standby), <1W(operation)
Transmitting power	<0.5mW
Detection zone Max.(D x H)	16m x 6m
Motion detection	0.5~3m/s
Detection angle	150°(wall installation) 360°(ceiling installation)
IP rating	IP20
Operation temperature	-25~70
Hold time	10s/30s/90s/3min/20min/30min
Detection sensitivity	10%25/50/75/100
Daylight sensor	5lux / 10lux / 30lux / 50lux / Disable
Life time	50,000 hours
Guaranty	5 years